Screech….ing hard drive – Finishing the Job (Part 6)
March 6, 2008 Advanced Skills, Technical, Tips, Troubleshooting Comments Off
One drive systems usually have no jumpers while two or more drive systems can have them installed. Set your errant drive as the slave and the master drive (the new one) as the master drive. Install the drive and screw securely while ensuring all power cables and connectors are set in their proper places before you power up. Partition the new drive if desired and format each partition (this ensures no malicious programs might have been innocently???? left in the drive during testing by the retailer or manufacturer) even if the retailer who sold you the drive says it is factory formatted. Re-install the OS, drivers and all the other programs; re-copy all the necessary files and you’re all set to go. Oh, don’t forget to take out the errant drive after you copy all your documents and files (the drive can fail and damage the computer if the controller board shorts due to failure of the mechanical parts damaging the rest of your computer including the new drive).